Formlabs Form 2
- Dental Resins
- Jewelry Resins
- FAQs
-
Profile Settings for 3D Printers
Anycubic 3D Printers Settings Phrozen 3D Printers Settings Elegoo 3D Printers Settings Flashforge 3D Printers Settings Wanhao 3D Printers Settings Epax 3D Printers Settings Longer 3D Printers Settings Creality 3D Printers Settings Nova3D Printers Settings Peoply 3D Printers Settings Zortrax 3D Printers Settings
- Digital Jewelry Production
- Digital Dental Production
- Blog
Powerresins SLA resin is an SLA castable 3d printer resin that is fully compatible with Formlabs Form 2.
Print with Formlabs Form 2
We recommend to use SLA resin to print up to 0.25 mm thin strings.
Printing Settings
Please put 2 drop primer resin to your build platform and spread on it. The primer resin comes with your resin into a separate small bottle.
Make sure that your Formlabs Form2 is in Open Mode.
Select Castable V2 in Preform with 50 micron
Please shake your resin bottle before pour in resin tank
TroubleShooting
As you know, you will need to change your resin tank in average after 1 kg resin usage.
Make sure to put your designs always in different location on your build platform to increase your resin tank's lifetime.
Please filter your resin after any failed print in order to avoid small dusts or parts that may affect your next prints.